Electronic power unit with 2 230V motors, with built-in receiver
■ In addition to all the basic features, you still have the following:
- Decrease in closure and aperture
- Leaf-to-sheet relaxation control
- Pedestrian opening with angle programming required
- Outlet for electro-lock
- Maximum power stroke at start-up
- Power stroke at end of closure
- Front force strike for opening the electro-lock
- Output for 2 sets of photocells
- Programming of functions by command
- Condominium function: Inhibition of opening commands
- Hydraulic engine pressure maintenance every 2 hours
- Self-diagnosis of possible faults through the signaling of 4 leds
- Possibility to be controlled by 1 clock for opening and closing
- Schedule 1 stop contact
- Programming remote control
- Memory capacity 150 codes
■ Technical Specifications:
- Power supply: AC230V 50-60Hz 1600W max.
- Flashing output: AC230V 500W max.
- Motor outputs: AC230V 500W max.
- Electric lock output: DC12V 15W max.
- Photocell power supply: AC24V 3W max.
- Low voltage safety devices and controls: DC24V
- Radio receiver: 433.92 Mhz
- Compatible commands: 12-18 Bits or Rolling Code
- Memory: 150 TX codes (COD + COD PED)
- Container dimensions: 190x140x70 mm
- Operating temperature: -10 ° C ~ 55 ° C
- Degree of protection: IP56